




Atlas Copco ROC D9-11
68 903EUR
- ≈ 80 059 USD





Atlas Copco ROC D7c-11
85 000EUR
- ≈ 98 762 USD





Atlas Copco ROC D7C-11
62 500EUR
- ≈ 72 619 USD





Atlas Copco ROC F9-11
64 597EUR
- ≈ 75 055 USD





Atlas Copco ROC D5
73 210EUR
- ≈ 85 063 USD





Atlas Copco ROC D7-11
60 000EUR
- ≈ 69 714 USD





Atlas Copco ROC D7-11
65 000EUR
- ≈ 75 524 USD





2010 ATLAS COPCO ROC D9
73 091EUR
- ≈ 84 925 USD





Atlas Copco D9c -11
87 000EUR
Prix HT
- ≈ 101 086 USD





Atlas Copco ROC F9
51 677EUR
- ≈ 60 044 USD
Foreuse Atlas Copco Roc D9C-11
Publié: 5an(s) 7mois

Nous avons des offres similaires à cette annonce
Regarder des offres similaires en stock

Publié: 5an(s) 7mois
69 827EUR
- ≈ 81 132 USD
22 Décembre 2020
Voulez-vous voir les tarifs des offres similaires?
Regarder des offres similaires en stockPlease provide reference number upon request: 6482
****
6734 total hours.
2100 hammer hours.
2160 Hammer.
New type of cottage.
Silent kit on compressor.
Comes with complete silent drill head kit.
All fans for the heater and climate in the cabin are changed.
Winch.
Vacuum cleaner.
Filling pump.
Vacuum cleaner nozzle is raised.
Central grease.
168 kw.
16 500 kg.
Webasto.
Climate a / c.
Radio / CD.
Full engine service with valve adjustment recently performed.
New hoses for the drive motors.
Changed water pump, thermostat and tempf recently.
All 5 boilers are thoroughly cleaned.
Attachment between engine and hydr. Pump is switched to one that is reinforced.
New exhaust muffler.
All hydr. hoses from the king to the hammer are changed in 2019.
New sliding rails for hammer.
Storage of motor to rod magazine is new.
Feed cylinder is overhauled.
New plug cylinder.
Drill st is welded up.
New coarse separator.
New hose for st vsuger.
All linings in banana and swing head are replaced.
New stock and new wires for feeding.
Complete new chassis.
Rod holders are swapped.
Fan motor and starter rail are replaced.
4 new batteries.
The rig is ready to be put to work, hammer is mounted on after it is overhauled.
Ready to put into work.
Secoroc GM RH grinds 2016 mod. New grinding head with motor In 2019. can be included at an additional cost.
1 pcs 51 mm cecoroc steering steel and 7 pcs 45 mm cecoroc drill rods that have gone 1980 meters can follow for an extra charge.
Cette offre est uniquement à titre informatif. Veuillez confirmer les détails directement auprès du vendeur.
69 827EUR
- ≈ 81 132 USD
22 Décembre 2020
Voulez-vous voir les tarifs des offres similaires?
Regarder des offres similaires en stockCette offre est uniquement à titre informatif. Veuillez confirmer les détails directement auprès du vendeur.









